Payment & Shipping Terms:
|Magnitude:||10-50mm, 10-100mm||Capability:||Alloy Additive|
|Name:||Carbon Ferro Chrome||Purity:||Standard Or As Customers Request|
|Standard:||GB/T 1234-2012||Feature:||High Resistance|
Steelmaking Hc Ferro Chrome Alloying Agent Blocky For Ball Steel 10mm - 100mm
1. The addition of chromium to steel can significantly improve the oxidation resistance of steel and increase the corrosion resistance of steel. Chromium is contained in many steels with special physicochemical properties. The chromium in the steel is added with ferrochrome.
2. High carbon ferrochrome is used as an alloying agent for ball steel (0.5% to 1.45% Cr), tool steel, die steel (5% to 12% Cr) and high speed steel (3.8% to 4.4% Cr) to increase steel. The hardenability increases the wear resistance and hardness of the steel. The addition of chromium to cast iron improves hardness and improves wear resistance. Chromium containing 0.5% to 1.0% improves mechanical properties. High-carbon ferrochrome and charge-grade ferrochrome are used in large quantities to smelt stainless steel (AOD or VOD method) to reduce production costs.
3. Medium and low carbon ferrochrome is used to produce medium and low carbon structural steel, carburized steel, gears, high pressure blower blades, valve plates, etc. Micro-carbon ferrochrome is used in the production of stainless steel, acid-resistant steel, heat-resistant steel and electrothermal alloy.
Ferrochrome is classified into high carbon ferrochrome according to different carbon content, including loading grade ferrochrome (C≦10%), medium carbon ferrochrome (C≦4.0%), low carbon ferrochrome (C≦0.5%), microcarbon Ferrochrome (C≦0.15%), etc. Commonly used are silicon chromium alloys, chromium nitride and the like. Ferrochromium is mainly used as an alloying additive for steelmaking, and was added in the later stages of refining of steelmaking. In the smelting of low-carbon steel such as stainless steel, low-carbon and micro-carbon ferrochrome must be used, so the production of refined ferrochrome has once been developed on a large scale. Due to the improvement of the steelmaking process, when producing steel such as stainless steel by the AOD method (see refining outside the furnace), the carbon ferrochrome (mainly the charging grade ferrochrome) is used for the furnace, so it is only necessary to increase the temperature in the later stage. Micro-carbon ferrochrome is used to adjust the composition, so now the focus of ferrochrome production is to refine carbon ferrochrome.
|Other chemical composition and size can be supplied upon request.|
F & Q:
1. What is our MOQ?
Basically, Our MOQ is 20 tons. There is no specific limit to order, we can give the best offer according to your situation.
2. Do you provide samples?
Yes, We do. Samples are always available and they can be sent to you directly.
3. How long does the delivery time take?
Our normal delivery time takes about 3 weeks once the contract singed, but it also depends on the quantity of the order.
4. Can we visit your plant?
Of course, we will be always looking for you.